Loading... Please wait...

Stay up-to-date!

Subscribe to our email newsletter and stay ahead of the game.


MILLER WELDMASTER T300 EXTREME EDGE

  • Miller Weldmaster T-300 Edge
  • Hem - A = wedge weld width. Guide supplied with Miller Weldmaster T300 Extreme Edge machine.
  • Hem with pocket - A = wedge weld width, B = selected pocket size. 1 x single size pocket supplied with Miller Weldmaster T300 Extreme Edge machine.
  • Hem with rope - A = wedge weld width, B = rope size. 1 x single size hemming guide for hem with rope supplied with Miller Weldmaster T300 Extreme Edge machine.
  • Overlap - A = wedge weld width. OPTIONAL guide for Miller weldmaster T300 Extreme Edge. Note - this is not recommended where image alignment is required.
  • Fin seal - A = wedge weld width. OPTIONAL guide for Miller Weldmaster T300 Extreme Edge machine.

Product Description

For high speed hem, pocket and rope-in-hem finishing of your banners, signs and printed media.


The T300 is designed to save time, money and labour costs.

For 1 person operation and welding speeds up to 20m / minute for the most efficient production.

The simple PLC touch screen is used to recall stored parameters for your most commonly made products and has multi-language options should they be needed. This stores the precise parameters required for different materials ensuring perfect and consistent seams every time.

The versatile machine arm can easily be switched from flat-bed position to post or feed-off-the arm depending on your product.

Easy change guides mean that the operator can perform different seams, hems and pockets all on the same machine with minimum change-over time.

The T300 Edge is supplied with the hot wedge heat system

Power requirements are 220 - 240V, 1 phase, 32 Amps. Air requirement 3 cfm at 90 psi (85l / min at 6.2 bar)

Solent have demonstration machines which enables us to offer weld samples, material testing and demonstrations so that you can be sure the machine suits your purpose as well as your budget. We are also able to visit your premises to advise on solutions to your welding requirements. Please contact us to arrange a visit to us or for us to come to you.

What our customers say:

“We have had our Solent / Miller Weldmaster T300 Edge for a few months and ‘It does what it says on the tin’. All our smaller banners are one man operations now and we recently welded a 30m x 3m banner– saving us a lot of time and money. We’ve had no problems with the machine itself and our operators are progressing nicely from hems to pockets and joins. At current usage the machine will have paid for itself within a year.”

Darren Marsh, OTW Imaging Limited

“We were outsourcing the finishing of our banners until we took the decision to install the Miller Weldmaster T300 3 years ago. In terms of reliability, since then we have had no major problems and made massive financial savings by hemming all our PVC, PE and Mesh banners on the T300. It is easy to operate and once you get to know it, even the largest banners can be handled well.

Declan Kelly, Horizon Graphics

To find out more about this product call us or